0 Item(s) $0.00
 

Browse All Categories


Storage

Networking

IBM pSeries

IBM iSeries

IBM xSeries

IBM BladeCenter

IBM Power Systems

IBM Mainframe

Used HP Servers

Used Dell Servers





  

Switches

Switches Save on new and refurbished network switches. We carry the full line of dumb switches and smart switches from top brands like HP, Cisco, 3COM, and many more. Browse our huge selection of network switches below. When you are ready to order, call us at (763) 577-0803. Thanks for shopping with Minnesota Computers Corporation.
   

Narrow Results

Smart Switches

Results

1202 Results Found
Viewing Results 1 - 20
Page 1 of 61

HP 99444 The new HP Console Switches with Virtual Media ease the management of your datacenter. The HP IP Console Switches with Virtual Media provide both local and remote access to a variety of devices from inside and outside the datacenter and require no software be installed on the target servers. Now administrators can not only remotely access KVM functions for day to day management but can also map a drive on their workstation to target servers to perform application and OS upgrades, firmware upgrades, or even installations. Multiple levels of encryption and authentication via LDAP insure enterprise-wide security. The HP Server Console Switch with Virtual Media provides local access to attached devices at the rack level. The switchable USB pass-through allows connection of USB devices for performing software upgrades or installations. These Console Switches use HP's proven Cat5 and intelligent Interface Adapters to improve cabling and airflow, and allow for cascading up to three levels. HP AF600A
HP Server Console KVM Switch with Virtual Media 2 x 16		 Call For Price
Cisco 99421 The Cisco Catalyst 2960-24TT 24 Port Switch is in a new family of fixed configuration standalone devices that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling enhanced LAN services for entry level enterprise, mid market, and branch office networks. The Cisco Catalyst 2960-24TT 24 Port Switch offers integrated security, including network admission control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge. Cisco Catalyst 2960-24TT 24 Port Switch (WS-C2960-24TT-L)
Cisco Catalyst 2960-24TT 24 Port Switch 		Call For Price
HP 99445 HP's IP Console Switch with Virtual Media is a key component in managing the heterogeneous data center and along with the IP Viewer software allows remote access to multiple servers running various operating systems. Virtual Media capability allows a drive or ISO image to be remotely mapped to an attached server in the data center or a remote office for software installations and upgrades. An intuitive On-Screen Display (OSD) provides menus for configuration, virtual media, display, and even security and upgrades from the local console. In cascaded environments the HP IP Console Switch with Virtual Media can allow an administrator to manage up to 4096 servers across three tiers from a single console. When tiered with additional HP Server Console Switches with Virtual Media application installations and upgrades can be pushed through to any server on any of the three tiers from a single console. The HP IP Console Switch with Virtual Media is backwards compatible with all HP Cat5 based Server Console Switches and interface adapters that do not support virtual media. HP AF601A
HP IP Console KVM Switch with Virtual Media 2x1x16		 Call For Price
HP 99446 HP's IP Console Switch with Virtual Media is a key component in managing the heterogeneous data center and along with the IP Viewer software allows remote access to multiple servers running various operating systems. Virtual Media capability allows a drive or ISO image to be remotely mapped to an attached server in the data center or a remote office for software installations and upgrades. An intuitive On-Screen Display (OSD) provides menus for configuration, virtual media, display, and even security and upgrades from the local console. In cascaded environments the HP IP Console Switch with Virtual Media can allow an administrator to manage up to 4096 servers across three tiers from a single console. When tiered with additional HP Server Console Switches with Virtual Media application installations and upgrades can be pushed through to any server on any of the three tiers from a single console. The HP IP Console Switch with Virtual Media is backwards compatible with all HP Cat5 based Server Console Switches and interface adapters that do not support virtual media. HO
HP IP Console KVM Switch with Virtual Media 4x1x16 		Call For Price
HP 99447 HP J4850A#ABA
 Call For Price
HP 99448 The HP Procurve 4160gl is packed with features to connect your network with ease. 60 10/100/1000 ports along with 6 mini-GBIC ports will allow you to connect numerous computers with the flexibility and performance to cover all your needs. It is a low cost and modular alternative to the stackable switches you see more regularly. Your network will have robust, secure capabilities across bandwidth-hungry applications ranging from data to video. If your network needs a switch that will perform today and in the future, the 4160gl is the best solution for you. HP J8152A#ABA
Hewlett Packard Procurve 60 Port Gigabit Switch		 Call For Price
HP 99449 The Brocade 8Gb SAN Switch for HP BladeSystem c-Class delivers an easy to manage embedded Fibre Channel switch with 8 Gbps performance. The Brocade 8Gb SAN Switch hot-plugs into the back of the HP BladeSystem c-Class Enclosure. The integrated design frees up rack space, enables shared power and cooling, and reduces cabling and small form-factor pluggables. Enhanced trunking support with external switches provides higher bandwidth to enable demanding applications such as server virtualization. New features in the Power Pack+ option enable you to manage data flow to maintain optimized application performance. The 12 or 24 auto-sensing ports support lower bandwidth components for investment protection and an upgrade license enables you to ‘pay as you grow’. The Brocade 8Gb SAN Switch saves space and cost, significantly simplifies the SAN environment, enables easier deployment and management, and delivers the performance required for emerging higher throughput applications. HP AJ822A
Brocade 8Gb SAN Switch 8/24c Power Pack+		 Call For Price
HP 99451 The ProCurve Switch 2610-24-PWR is IEEE 802.3af-compliant for Power over Ethernet (PoE) and provides up to 15.4 W for 24 ports. It also includes two 10/100/1000Base-T ports and two mini-GBIC slots for Gigabit uplink connectivity. An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and management features, free software updates, the 2610-PWR series is a cost-effective solution for customers who are building converged enterprise edge networks. HP J9087A#ABA
HP ProCurve 2610-24-PWR Switch		 Call For Price
HP 99452 The ProCurve Switch 4200vl series consists of modular chassis that provide a flexible, cost-effective LAN solution as an alternative to stackables. These switches offer a proven chassis form factor with high quality and reliability in 10/100 and 10/100/1000 scalable solutions that integrate easily into any network. HP J8774A#ABA
HP ProCurve 4208vl-64G Gigabit Ethernet Switch 		Call For Price
HP 99453 The GbE2 Interconnect Kits are intended for applications that require network adapter consolidation to 1000 Mbps (Gigabit Ethernet) and HP ProLiant Server Blade Fiber Channel pass-through. The ProLiant BL p-Class C-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadT2 Interconnect Modules that provide twelve (12) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure. HP 283192-B22
HP ProLiant BL p-Class Interconnect 6 Port Gigabit Ethernet Switch 		Call For Price
HP 99454 The GbE2 Interconnect Kits are intended for applications that require network adapter consolidation to 1000 Mbps (Gigabit Ethernet) and HP ProLiant Server Blade Fiber Channel pass-through. The ProLiant BL p-Class F-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadSX Interconnect Modules that provide eight (8) LC 1000 SX and four (4) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure. HP 283193-B22
HP ProLiant BL p-Class Interconnect 4 Port Gigabit Ethernet Switch 		Call For Price
HP 99455 The 8/8 SAN Switch is targeted for small to medium sized enterprises and is ideal for entry-level SANs, and as an edge switch for core-to-edge SAN environments. The 8/8 SAN Switch provides SAN connectivity that simplifies IT management infrastructures, improves system performance, maximizes the value of virtual server deployments, and reduces overall storage costs. The 8/8 SAN Switch comes with a Full Fabric license and may be connected to multiple switches. The 8/8 SAN Switch provides auto-sensing 1, 2, 4, and 8 Gbit/sec. full duplex performance to enable up to 128 Gbit/sec. of throughput. To provide more targeted performance, enhanced Inter-Switch Link (ISL) Trunking combines up to eight ISLs between a pair of switches into a single high-speed trunk capable of up to 64 Gbit/sec. of throughput. The evolutionary design provides these capabilities while consuming less than 2.5 watts of power per port for exceptional power and cooling efficiency. HP AM867A#ABA
HP StorageWorks 8/8 Full SAN Switch		 Call For Price
HP 99456 The HP StorageWorks 4/8 Base SAN Switch offer 4Gb connectivity for entry-level storage area networks (SAN), and the ability to grow to a core-to-edge infrastructure. The simplicity and ease-of-use advantages of these switches help increase administrator productivity and lower the cost of management. Both switches deliver eight (upgradeable to16) high performance Auto Sensing 1, 2, and 4Gb/s Fibre Channel ports. An optional 4 port activation license increases the number of active ports to 12 or 16 ports. Plus, the HP StorageWorks SAN 4/8 Base Switch is fully non-blocking and provide 64 to 128Gb end to end switching (4Gb full duplex) bandwidth. The HP StorageWorks SAN 4/8 Base Switch provides single-switch connectivity for a new, simple SAN installation and connects to storage and servers only. HP A8000A#ABA
HP StorageWorks SAN switch 4/8 Switch 		Call For Price
HP 99457 The HP StorageWorks 8/24 SAN switch range in size from 16 to 24 ports, functioning as standalone core switches or as lower-cost edge switches in large core-to-edge tiered storage networks. As a result, it can meet the needs of small and medium-size organizations as well as very large enterprises. With Ports on Demand upgrades, organizations can minimize their upfront investment while maintaining their ability to scale in low-cost "pay-as-you-grow" increments in the future. With a design that provides full 8 Gbit/sec non-blocking, full-duplex performance on every port, HP 8/24 SAN Switch meets the higher performance levels required by consolidated, virtualized environments. With easy-to-use management tools and wizards, and full line rate performance on every port, organizations can streamline implementation and ongoing management in a wide range of environments. The 8/24 SAN switches also provide unprecedented investment protection. Auto-sensing ports that support backward compatibility with 1, 2, 4, and 8 Gbit/sec devices significantly reduce deployment complexity and costs, while providing compatibility with installed devices. Organizations that do not require 8 Gbit/sec interfaces can populate the new switches with 4 Gbit/sec. SFPs, while preserving their ability to easily upgrade to 8 Gbit/sec. SFPs in the future. The 8/24 SAN Switch with 24 enabled ports may be deployed as a full-fabric switch or in Access Gateway mode, which provides connectivity into any SAN (the default mode setting is a switch). Access Gateway mode utilizes NPIV switch standards to present Fibered Channel connections as logical devices to SAN fabrics. HP AM868A#AC3
HP StorageWorks SAN Switch 8/24 Base		 Call For Price
HP 99462 HP StorageWorks 1000 Modular Smart Array reduces the cost of building up to a 48TB consolidated storage array system while giving all the benefits of an enterprise-class SAN and also enabling near online disk to disk backup. This kit includes: 1 redundant controller; 1 HP MSA SAN Switch 2/8, 4 SFP transceivers, 2 FC1142SR 4Gb PCI-E HBAs and cables. It's designed as an upgrade for the MSA1000 SAN Starter G2 Kit. HP 397079-B22
HP StorageWorks Smart Array 1000 SAN Starter Kit G2 Switch 		Call For Price
HP 99463 The 8/8 SAN Switch is targeted for small to medium sized enterprises and is ideal for entry-level SANs, and as an edge switch for core-to-edge SAN environments. The 8/8 SAN Switch provides SAN connectivity that simplifies IT management infrastructures, improves system performance, maximizes the value of virtual server deployments, and reduces overall storage costs. HP AM869A#ABA
HP StorageWorks 8/40 Base SAN Switch 		Call For Price
HP 99464 The HP Procurve Series 2700 Switches are multiport switches that can be used to build high-performance switched workgroup networks. These switches are store-and-forward devices that offer low latency for high-speed networking.These switches are designed to be used primarily to provide Gigabit/second network speed to the desktop. You can also directly connect servers and peripherals to these switches and connect them to a network backbone or to other switches, hubs, or routers. HP J4897A#ABA
Hewlett Packard 24 Port Gigabit Switch		 Call For Price
HP 99458 The HP StorageWorks 8/40 SAN Switch is ideal for organizations requiring a flexible solution that is forward and backward compatible and will meet rapidly evolving storage requirements, either as a small "building-block" switch for a departmental fabric or as a high-performance edge switch in larger core-to-edge SAN configurations. The 8/40 SAN Switch is designed for rapidly growing storage requirements in mission-critical environments, combining 1, 2, 4, and 8 Gbit/sec. Fiber Channel technology in configurations of 24, 32, or 40 ports. A fully populated 8/40 SAN Switch with 40 ports enabled provides an aggregate bandwidth of 680 Gbit/sec. Inter-Switch Link (ISL) trunking can supply up to 64 Gbit/sec. of balanced data throughput to reduce congestion and increase bandwidth. The 8/40 SAN Switch also enables organizations to use 4 Gbit/sec. SFPs and upgrade to 8 Gbit/sec. SFPs when required. The 8/40 SAN Switch provides a reliable foundation for disaster recovery and business continuance by employing enterprise-class availability features such as hot-swappable, redundant, and integrated fan and power supply assemblies. Moreover, hot code load and activation help maximize application uptime with faster system upgrades and maintenance to reduce the dependency on scheduled outages. HP AM870A#ABA
HP StorageWorks 8/40 Power Pack SAN Switch 		Call For Price
HP 99459 The 8/8 Base SAN Switch is targeted for small to medium sized enterprises and is ideal for entry-level SANs, and as an edge switch for core-to-edge SAN environments. The 8/8 Base SAN Switch provides SAN connectivity that simplifies IT management infrastructures, improves system performance, maximizes the value of virtual server deployments, and reduces overall storage costs. The 8 Gbit/sec Fibre Channel 8/8 Base SAN Switch provides an affordable single-switch solution for a new, small SAN installation and connects to storage and servers only. HP AM871A#ABA
HP StorageWorks 8/80 Base SAN Switch 		Call For Price
HP 99460 The HP StorageWorks 8/80 SAN Switch is ideal for medium- to large-sized organizations that need a scalable and high-availability solution to meet rapidly evolving storage requirements. Whether an organization's requirements call for a standalone high port count core switch, or a large building block for a tiered enterprise fabric, the 8/80 SAN Switch provides the performance, scalability, and availability requirements to meet the needs of consolidated virtual data center. The 8/80 SAN Switch features a non-blocking architecture with as many as 80 ports concurrently active at 8 Gbit/sec full duplex providing an aggregate bandwidth of 1280 Gbit/sec. Inter-Switch Link trunking can supply up to 64 Gbit/sec of balanced data throughput to reduce congestion and increase bandwidth. The density of the 8/80 SAN Switch uniquely enables fan-out from the core of the data center fabric with less than half the number of switch devices to manage compared to traditional 32 or 40 port edge switches. When deployed as a core SAN fabric switch, the fully enabled 80 port SAN Switch provides a single-switch core footprint that is ideal for SAN fan-out using lower-density B-series switches. For mission critical environments, the 8/80 SAN Switch provides enterprise-class availability features such as hot-swappable, redundant, and integrated fan and power supply assemblies. Hot code load and activation help maximize application uptime with faster system upgrades and maintenance. The Power Pack+ software provides the SAN administrator with the necessary tools to monitor the health and performance of the network through a single pane of glass. Enhanced capabilities ensure ample bandwidth for mission-critical applications. HP AM872A#ABA
HP StorageWorks 8/80 Power Pack SAN Switch		 Call For Price
 

Site Help About Us Services Site Tools
Site Map
Return Policy
Terms & Conditions
Privacy Policy		 About Us
Careers		 Asset Recovery Service
Authorized Repair Service
Data Recovery Service
GSA Sales		 Extended Inventory
Return A Product
Request A Quote
Order Tracking

Copyright © 2010 Minnesota Computers®
All Rights Reserved